|
|
Vibration Propagation Analysis of Coupled Structure Acoustic Space
Kostelník, Jan ; Pellant, Karel (referee) ; Novotný, Pavel (advisor)
The aim of this Master’s thesis Vibration Propagation Analysis of Coupled Structure Acoustic Space is to analyze vibration propagation in combustion engine, from combustion space through solid structure to fluid surroundings. Then analyze the noise increase as pressure changing in fluid space around the solid structure. There was made a analyze of single piston engine in different frequency and piston location. A simulation of distribution of a pressure waves was made in an ANSYS application.
|
|
|
Spirometric measurement in LabVIEW
Hastík, Matěj ; Slávik, Vladimír (referee) ; Harabiš, Vratislav (advisor)
This bachelor thesis deals with a detailed description of functional examination of lungs. Predominant part of this thesis is focused on spirometry method and evaluation with spirometry curve. It also deals with study of Vernier LabPro, properties of spirometry probe Vernier and proposal of the structure of software in LabVIEW environment, which will serve for basic spirometry examination. The second part is devoted to the design of the program in LabVIEW, description of its features and capabilities and its actual runtime. The program is further enhanced with a feature that allows the processing, evaluation and archiving of measured spirometric curves. The program also includes a temperature compensation of breath in and breath out air.
|
|
|
Structure - space - city Urban block complation
Burešová, Karolína ; Kurtis, Gabriel (referee) ; Palaščák, Michal (advisor)
Based on a regulatory plan, I chose a plot of the city corner for my diploma thesis, which is an introduction to Francouzská Street. At present, this plot is used only as a parking lot, but it is located in an interesting busy place in the mouth of the five roads. Based on the new regulatory plan, the plot is located on the dominant site of the city piazzetta with a function full of people and commercial partners. My goal is to create a significant city corner, which will be a local dominant of the nearby area. The filling of the house is commercial, administrative, and residential. The proposal will allow fluctuations in the ratio between these functions due to the variability of market demand. With the statue of a staircase, I want to create a communication space for the residents of the house, where PROMENADE will be created and at the same time will serve as an interesting backdrop for the parterre.
|
|
|
Spica/ Brno, Nove sady 49°11'20.3"N 16°36'29.4"E
Křenek, Roman ; Havlíček, Tomáš (referee) ; Nový, Vítězslav (advisor)
The new town hall for Brno Stred is the icing on the cake following the planned large-scale construction of the new Main Railway Station and the Trnitá district, which should connect this railway station with the historic center. Such a change will significantly affect the expression of the city center, and such a step definitely has to include a modern representative institution. The concept is situated on the edge of the historic center at the estuary of the planned boulevard of the Trnitá district in Nové sady, above which the dominant of Brno Petrov rises. For this reason, the design of the town hall must be sufficiently representative, but at the same time lowly towards the historic buildings. Along with this fact, I am trying to answer the question of what the town hall of the 21st century should look like.
|
|
| |
|
|
Panel meassurement device
Vaško, Pavel ; Kaczmarczyk, Václav (referee) ; Bradáč, Zdeněk (advisor)
The master thesis includes a literature search, which is focused on questions around panel measure instruments for measuring analog voltage signals. There is the block diagram and the concept of measuring voltage values designed from collected information and defined requirements to the device. In the next step a design of the circuit diagram is created and published and consequently transferred into PCB. The whole board has been fabricated, assembled and tested. The firmware development starts with the definition of basic functional blocks for using of internal elements of the device, which is followed by the implementation of the Modbus slave station service routine. The top part presents graphical user interface on the device.
|
|
|
The Rehabilitation of the historical center and adjacent surroundings of Kyjov with a focus on the public space
Hlubinková, Monika ; Řehák, Filip (referee) ; Pavlovský, Tomáš (advisor)
The diploma thesis related to rehabilitation of the historical inside and adjacent neighborhood Kyjov deals with the analysis of the actual state of the city, the evaluation of its problems and potential and the subsequent design of the urbanistic, transport and functional solution. The goal of the thesis is to create better life conditions and thus to attract more new inhabitants to the city. Building new apartment buildings, leisure centers and coworking centers could help to achieve the goal. Designing of new public spaces, which offer plenty of meeting and relaxing places makes the life more quality. The new form of the city is designed with an emphasis on urbanistic contemporary approaches and views, and related to the view of the city as a safe place for pedestrians.
|
|
|
Industrial bakery Herold Brno
Soška, Jakub ; Štikar, Jaroslav (referee) ; Nový, Alois (advisor) ; Donaťáková, Dagmar (advisor)
The aim of this work is to project documentation, which consists of documentation for building permits in 1: 100 scale and documentation for construction in 1:50 scale. The work is based on architectural studies prepared in the course AG35. The subject of the thesis is the solution of new industrial bakeries Herold in Brno in Horní Heršpice on the street K Terminálu. The solution includes both industrial building itself and its surroundings. The basic idea was the breakdown of the three basic longitudinal masses into smaller parts. They create the impression folded structures from individual blocks. The blocks are separated by a narrow alley, which is located in the roof blocks embedded in the mass. The overall appearance of the industrial bakery is also supported using cassette facade system on the front blocks.
|
|
|
Utilization of multi-body simulation tools in subject Dynamics
Lokšeninec, Ľuboš ; Houfek, Lubomír (referee) ; Březina, Lukáš (advisor)
The bachelor’s thesis is conducted in purpose of modernization the dynamics theory teaching methods by the multi-body simulation systems. Thesis acquaints student with accessible simulation systems and provides a manual how to compose virtual models of physic frameworks. Student is introduced to the basic options of current multi-body system by means of pre-processed examples focused on rolling, oscillation and inertia moment. Thesis refers to present teaching methods with models composed in Matlab/Simuling system with SimMechanics sublibrary.
|
|
|
Temporary dwelling of migrants-reception and residential center
Richter, Pavel ; Kyselka,, Mojmír (referee) ; Nový, Alois (advisor)
This diploma thesis deals with the issue of crisis - the current issue in 2017. One of the issues is the need for the construction of a imigrant center in the Czech Republic. The locality in Brno was selected in Maloměřice. The location of the brownfield on the outskirts of the city district is used. The design is conceived as a closed block with two main diagonally inputs. The block is made up of two-storey buildings used for housing migrants. Within the block, there are two four-story buildings that serve as administration, maintenance, catering, education and leisure activities, ie all other activities except housing.
|
guest ::
